Hammerite Hammered Metal Paint

3 Günlük İşi 1 Günde Yapar
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Coverage 5m2/L for 2 coats with brush at recommended dry film thickness.
  • Drying Time 4 hours Drying time may be longer at high relative humidity and low temperature.
  • Coats 2
Product Features
  • All Weather Resistant
  • Long Lasting
  • High Coverage

Product Description

It is used as a corrosion-resistant and decorative coating on ferrous and non-ferrous metals, wood and some plastics.

Application Description

It is suitable for applications in small areas. Mix before use. To obtain corrosion resistance, apply the product to bare or rusty metal in 2 coats. Do not apply too much paint on the surface to avoid sagging in coat applications. Make sure corners and edges are properly covered, corners and edges are the spots with the highest risk of premature rusting. Roller: Suitable for flat large area applications. Hammerite is available ready to use. Hammerite can be thinned for easier painting on roller applications. 9 parts Hammerite 1 part Brush Cleaner or Synthetic Thinner can be thinned. Painting should be started from the edges, the remaining areas should be painted quickly. For best results, apply briefly and quickly. Spray: Suitable for large areas. All colors of Hammerite Hammered contain silicone. Air Spray: Thin Hammerite 15% with Hammerite Brush Cleaner and Thinner. Set the spray gun to 25/35 psi (approximately 2 Bar). Apply 3-4 thin coats, waiting for an hour between coats. 1 thick coat can be applied to obtain a glossy appearance on the last coat; however, it is necessary to pay attention to flowing and sagging. Airless Spray: If necessary, Hamerite can be thinned with 15% Hammerite Brush Cleaner and Thinners. Nozzle Pressure: 2500-3000 psi (approx. 170 Bar). Nozzle diameter: 375-500 microns/0.015 - 0.020. Apply 2-3 coats, waiting 2 hours between coats or after touch dry. For Air spray and Airless spray: Stir the paint in the chamber before or during use to obtain an even color. For best results use only Hammerite Brush Cleaner and Thinners.

Health & Safety

Fetching the data, please wait...