It's nice to see you!
Otherwise login by email
Welcome to Marshall Boya
Otherwise login by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
Thanks!
Delete Account
Akrikor Elastomeric
-
Finish Semi-matt
-
Coverage 5 m2/L
-
Drying Time Waiting time between floors is between min 4 and 8 hours. Full drying time is min 24 hours.
-
Coats 2
-
Water Based
-
Ultra Adhesion
-
All Weather Resistant
-
Long Term Durability
-
Flexible Paint Films
Product Description
Application Description
If the plaster or exposed concrete of the surface to be made is rough, the paint is diluted 10% for the 1st layer and applied undiluted for the 2nd layer. The roller used should be moved in one direction. Otherwise, surface defect and color tone differences will occur. During the application, care should be taken not to overlap the layer. Application layers
Wait at least 4 to 8 hours between 2- It can be thinned by 5% to 10% according to the surface appearance and crack structure. 3- It should be thinned 10% for the first layer. 4- Depending on the desired surface appearance and crack structure for the second layer, it can be used without thinning or by thinning 5% to 10%. It should not be applied in rainy weather, on facades that receive direct and intense sunlight. Intermediate coats of primer and paint; should not be exposed to rain, dew and frost.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesIt can be safely used as a decorative treatment on naturally dried concrete, cement-based plaster, exterior plaster, brick, asbestos cement and old painted surfaces in good condition.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.