Akrikor Siliconed+Acyrlic

It can be used safely on conventional plaster, concrete, exposed concrete, fiberboard, aerated concrete, brick, etc., as well as on old painted surfaces as decorative.

On the surface of which the sub-surface process has been completed, after 1 layer is applied by choosing the appropriate primer, ACRICOR SILICONE + ACRYLIC should be applied at least 2 layers after 12 hours, depending on the type of primer. The roller used should be moved in one direction. Otherwise, surface defect and color tone differences will occur. Overcoat during application
Care must be taken not to climb. Depending on the ambient temperature and humidity between the application layers, min. 4 to 8 hours should be waited. In order to obtain a homogeneous and more covering surface, 2-3 minutes from roll applications, depending on the ambient temperature. Afterwards, it is recommended to scan with the same roller and pass over the painted surface without applying paint to the roller. It should not be applied in rainy weather, on facades that receive direct and intense sunlight. Intermediate coats of primer and paint; should not be exposed to rain, dew and frost.